These shafts use a screw to secure the piston. Two coatings to choose from: TiN shafts for the longest life and Factory Team Chrome shafts for the smoothest action.

3mm dia, 27.5mm stroke (up-and-down movement). TiN shafts for the longest life and Factory Team Chrome shafts for the smoothest action. Pair up by same body and shaft stroke. These screw-mounted shafts are not compatible with our E-clip shafts.

The chassis plate on most 1:10 Team Associated race vehicles (RC10B6.3, RC10T6.2, RC10SC6.2) is manufactured with a 27.5 degrees kickup angle at the nose.

These bulkheads allow for adjustment between 25 degrees and 30 degrees of kickup depending on the direction it is installed.

Install the “-2.5Deg” or “25Deg” side of the bulkhead towards the front of the car for 25 degrees of kickup.

Install the “+2.5Deg” or “30Deg” side of the bulkhead towards the front of the car for 30 degrees of kickup.

ASSOCIATED B6/B6.1 KIT GULL WING FRONT ARMS

ASSOCIATED B6/B6.1 STEEL CHASSIS WEIGHT 24G